skip to main text

Copying Originals

This section describes how to load originals and copy them to plain paper.

  1. Open the paper support (A).

  2. Pull out the paper output tray (B), then open the output tray extension (C).

  3. Load paper vertically WITH THE PRINT SIDE FACING YOU.

  4. Align the paper guides (D) with the paper width.

  5. Open the document cover (E).

  6. Load the original WITH THE SIDE TO COPY FACING DOWN and align it with the alignment mark (F).

  7. Close the document cover gently.

  8. Press the Black button or Color button (G).

Important

  • Do not open the document cover until copying is complete.

Note

  • For details on copy features, refer to Copying.